Dash cams are great pieces of technology, but they require a bit of work to install. I'll show you how to do it right!
How to install a dash cam
Dash cameras are a great way to keep an eye on what's happening around your car, especially if you're worried about getting in an accident. They're also useful for monitoring the activities of other drivers, and can provide much-needed evidence when something bad happens on the road.
In this guide, we'll look at how easy it is to install a dash camera in your car or motorcycle as well as on bicycles.
Where to install the camera
There are several options for where to install your dash cam, but the best location is on your windshield. This will ensure that you have an unobstructed view of everything in front of you. In addition, most states require a forward-facing camera for automatic emergency braking systems (AEB) and lane departure warning systems (LDWS). The exception is if you're using a rearview mirror mount as opposed to a suction cup mount then it's possible that some states don't require a forward-facing camera because they assume there'll be other cameras inside the vehicle recording all angles of what's happening while driving.
However, if everything is mounted on your car and still has issues with visibility or obstructions in front of it, try moving things around until they work properly!
What you'll need to install your dash cam
To install your dash cam, you'll need:
Power adapter (if applicable)
Dash cam system
Before you start installation
Plan out where you want to install the camera. Before you begin, decide on a spot for your dash cam. This can be anywhere on the dashboard in front of or near the driver's seat. You may also choose to set it up as a rearview mirror camera if you'd like to record what's happening behind you, too.
Check with your manufacturer about warranty information and hardware compatibility before installation. Make sure that any accessories purchased will work with the model of car that they're going into, as well as any other pieces that might be necessary like an external power source (if required).
Make sure your new purchase has enough power requirements for everyday use before installing it into your vehicle! If not enough power is available from what comes standard with cars today then consider purchasing some sort of adapter or converter box - this will help regulate voltage levels so everything runs smoothly without overheating during use!
How to wire a dash cam
The first step is to connect the camera to your car's battery. You can do this by plugging it into a fuse box, or if you want a clean installation, you can wire it directly to the battery terminal using a fuse from the local auto parts store (see below).
The second step is to connect the camera's wiring harness with your car's power supply through a fuse box (if so equipped) or directly to your car's cigarette lighter/12 volt outlet via an adapter cable that has been prewired with power (such as this one).
How to mount the camera on your windshield
Mounting the dash camera in the right spot is important, as this will make sure that you are able to record everything that happens in front of your vehicle. Here's how to mount your dash camera correctly:
Make sure the camera is high enough to capture the road but low enough so that it doesn't obstruct your view. There should be little to no distortion on your video recording if it has been placed correctly.
Use a flat surface for mounting purposes (preferably metal) so that there isn't any vibration from hitting bumps in the road affecting footage quality or audio recording accuracy. When attaching aftermarket accessories such as air fresheners or GPS systems, make sure they aren't blocking anything either!
Be aware of where people might walk by when parking their vehicle at night (streetlights) because these could also cause glare problems when filming
How to hide a dash cam wire in your car
Your dash cam is a powerful tool for protecting you from fraud and abuse. But if it's not hidden, it can also be a distraction that makes other drivers feel like they're being watched. The solution? A wire harness and cable tie.
A wire harness will keep the wires together and out of the way while still allowing you to access your camera when you need it to record evidence or take a picture in traffic. Just connect one end of the harness under your steering wheel column cover or airbag cover (if you have one). Then, run each individual cable through its hole in the harness until all but about 10 inches are sticking out on each side. Finally, secure them with cable ties either Velcro ones that come with most kits or standard zip ties from any hardware store and hide them under trim panels so they're out of sight but still accessible when needed!
A good camera will help you record what happens while you're driving.
A dash camera is a good way to prove your innocence in an accident. If someone bumps into you, or if they run a red light and cause you to crash, then a dash camera can help capture what happened.
A dash cam can also record evidence of criminal activity while driving. You may see someone breaking into cars or shops while parked at a stop sign and want to report them but don't have any proof other than your word against theirs. With a dash cam installed in your vehicle, you'll be able to provide law enforcement with video footage that shows what really happened all without risking getting pulled over for speeding or running through red lights yourself!
Dash cams are also helpful for recording road rage incidents as well as police misconduct in general (e.g., cops using excessive force).
We hope that this article has helped you learn how to install a dash camera in your car. We know there are many options out there, but we believe that the BlackVue brand offers a great product at an affordable price. If you’re looking for even more information on these cameras or other types of surveillance equipment, please visit our website at www.safetysystemsincorporated.com