how to install ring floodlight camera

 

Introduction

The Ring Floodlight Camera is a powerful tool for home security. It can let you see who's at the door, track when deliveries arrive and even keep an eye on your property while you're away. Installing a Floodlight Camera is easy to do yourself with no wiring required outside of your current floodlights. Here's how:

Connect the wires

  • Make sure that the connection is clean and secure. Use a screwdriver to tighten the wires into place, ensuring that they do not come loose or pull apart.

  • Check the floodlight to make sure it works properly after installing your Ring Floodlight Cam by turning it on and testing its range of motion.

Attach the mounting plate

The first thing you should do is install the mounting plate. This will help you to mount your Ring Floodlight Camera onto a wall or ceiling, and it has three screws that go through it and into the wall. You may want to use drywall anchors if you're attaching your Floodlight Camera to drywall so it doesn't fall off when someone knocks into it.

The backplate has holes for these screws, and once they're in place, simply slide on your Floodlight Camera and tighten down each screw before moving on to the next one until everything is securely attached. It's important that nothing is crooked or slanted when installing because this could cause problems with functionality later on down the line!

Fix the floodlights

  • Use a drill to make holes in the wall.

  • Screw the floodlights into the wall with screws, then level them with a spirit level (a flat piece of metal or plastic that you can use to check that things are straight).

  • Make sure you don't drill through any pipes or wires!

Mount it and tighten it

The first step is to mount the camera on the wall. The Ring Floodlight Cam has adhesive pads that stick to the wall and can support up to 40 pounds of weight. If you don't want to use these adhesive pads, there are two screws included in the box that you can use instead.

Next, tighten all four screws as much as possible using a screwdriver. This will ensure that your camera stays securely attached and doesn't fall off while you're moving it around later on when doing other steps such as mounting its power source or installing additional accessories like doorbells or chimes.

Now comes the most important part: checking whether or not everything is pointing in the right direction! To do this, tap on "Setup" from your updated app's main menu (from here it's called "Advanced Settings"). You should then see an option called "Floodlight Camera View." Tap on this option and drag it down until it reaches what looks like a roughly horizontal line drawn across your screen with arrows next to each side pointing down towards where they meet (this should be somewhere between level 99% and 100% brightness). Once you've found this position, tap Save Changes at the top of your screen; if all goes well this should be how things look now!

Installing a Ring Floodlight Camera is an easy DIY project.

If you're still unsure how to install a Ring Floodlight Camera, here are some steps to help you get started:

  • Connect the wires. The first step is connecting your floodlights to your power source and then plugging in the power cord from the camera so that it's ready for use.

  • Attach the mounting plate. Next, attach the mounting plate on top of your siding or brick wall using screws (or whatever hardware was included with your Ring Floodlight Camera). Make sure that if there are any wires or cables obstructing where you need to drill holes in order for everything to fit together properly; move them out of harm's way before continuing with any drilling or screwing down anything else inside that might take place during this step!

  • Fix up those lights! Once each individual piece has been secured onto its respective surface (i.e., wiring has been run through holes drilled into brickwork), tighten all bolts/screws securely until they're snug enough not fall off during normal usage but loose enough so as not able - potentially leading into disasterous results such as fire due being unable

Conclusion

Now that you’ve learned how to install your Ring Floodlight Camera, it’s time to start enjoying all of the benefits that come with owning a video security system. From being able to see who is at your door and talk to them from anywhere in the world, to catching intruders before they can cause damage or harm anyone on your property there are so many reasons why it’s worth investing in this technology!

 

0
0 ratings
Bella Beil
Bella Beil
I'm an experienced professional camera operator with over 10 years of experience working in a variety of industries. I have been shot for commercials, music videos, and feature films. I specialize in black and white photography and am extremely proficient in both manual and digital cameras. My clients have always appreciated my professionalism, skill, and yellowing skills.